Our range of visitor card capture devices (CC) can be supplied in a standalone housing or integrated within our speed gates and turnstile cabinets or sold as an OEM part.

Capturing contractors or visitor ID passes helps to greatly reduce the cost of lost cards and increases building security. The card capture device can work with simple paper passes or integrated with the end users own access control reader.

The standalone housing offer a slim profile making it easier to install beside or in front of most makes of pedestrian entrance control gates or turnstiles.

Any make of proximity card reader can be mounted inside the device, all that is needed is a dry contact output signal from the access control to confirm the inserted card is valid. After receipt of a valid card signal the card will be dropped into the collection box. If no signal is received after a pre-set time the invalid card will be returned.

How it works

ID cards, their holders and pin clips up to 100mm wide can be accepted. Lanyards must be removed from the holder before inserting the card and its holder in to the device.

Bottom lockable access panel and easy access to the mechanism makes card collecting and maintenance easy.

Elegant and sophisticated look.
High pedestrian throughput.
Modular construction product,
Various passage widths.
Single or double leaf obstacles.
Easy to install, service and maintain.
Can be integrated with various access control devices such as card or bio-metric readers.

There are typically FOUR safety concerns associated with pedestrian entrance control gates:

Hitting users that CORRECTLY use the gates.
Hitting users that INCORRECTLY use the gates.
User safety such as elderly, the infirm, disabled persons, parents with pushchairs and young children.
Hitting objects such as bags, trolleys, etc.

To resolve these concerns our gates provide:-

Safety in the opening and closing cycle.
Protection for the elderly, the infirm, disabled persons, parents with pushchairs and young children, etc.
Safety during miss-use.
Fire alarm input – on activation gates will open.

Compared to traditional tripod turnstiles, pedestrian paddle gates are more difficult to climb over and crawl under. There are typically FOUR security concerns associated with pedestrian entrance control gates:-

Jumping over.
Crawling under.
Tailgating.
Collusion – Wrong direction and Loitering.

Due to safety regulations, paddle leaf speed gates must put safety over security. To achieve a higher level of security some simple design rules can be applied:-

Double leaf obstacles – Open and close quicker than a single leaf versions.
Narrow walkways – Makes it more difficult for two people to pass at the same time.
Longer cabinets - Increase security over shorter cabinets, providing a better chance of detecting tailgating and collusion.
Higher obstacles - Reduces the threat of jumping over.
Small gap under the obstacle - Reduces the threat of crawling under.
We can also make some simple changes to the gates parameters to increase the security level, but reduces the safety level. Making changes to any parameter will increase the safety risk to uses.

Discover our full range of tripod turnstiles and speed gates

Paddle Gates (PG)

Swing and Pass Gates (SG)

Retractable Flap Speed Gates (RG)

Retractable Sliding
Speed Gates (RG)

Tripod Turnstiles (TT)

Full Height Turnstiles (FT)

External Speed Gates (ES)

Visitor Card Capture
(CC)

Our range of visitor card capture devices (CC) can be supplied in a standalone housing or integrated within our speed gates and turnstile cabinets or sold as an OEM part.

Capturing contractors or visitor ID passes helps to greatly reduce the cost of lost cards and increases building security. The card capture device can work with simple paper passes or integrated with the end users own access control reader.

The standalone housing offer a slim profile making it easier to install beside or in front of most makes of pedestrian entrance control gates or turnstiles.

How it works

ID cards, their holders and pin clips up to 100mm wide can be accepted. Lanyards must be removed from the holder before inserting the card and its holder in to the device. Bottom lockable access panel and easy access to the mechanism makes card collecting and maintenance easy.

Discover our full range of tripod turnstiles and speed gates

‘Evolving the way you manage your pedestrian entrance control’

Socials

ID cards, their holders and pin clips up to 100mm wide can be accepted. Lanyards must be removed from the holder before inserting the card and its holder in to the device.

Bottom lockable access panel and easy access to the mechanism makes card collecting and maintenance easy.